Newcomens Dampfmaschine aus Meyers 1890
The steam is produced in the boiler A and reaches the cylinder B through the pipe C. The steam in the cylinder forces the piston D upwards, like in Papin’s invention, assisted by the counterweight K. At the piston D the force is coupled via the fixed rod E and in turn by a chain to the beam F. The counterweight K is attached via the chain H to the other side of the beam. The pump rod I is rigidly coupled to the base of the counterweight, being pushed up and down by the corresponding movements of the counterweight. By stopping the flow of steam through pipe C, by use of the stopcock, the contents of the cylinder are closed off. Water from the reservoir L is injected into the cylinder via the pipe P. (This point in the cycle is shown in the illustration). The injected water speeds up condensation of the steam in the cylinder, causing a vacuum. The piston is pushed downward by the air pressure from outside, moving the mechanically coupled beam F as well. This movement lifts the counterweight K and the coupled pump rod I upwards. The pipe R takes away the condensed water, S marks the section of the U-shaped pipe submerged in the reservoir, closing off the cylinder in a steam tight manner.
M is the linkage of a small aŭiliary pump which fills the reservoir L through the pipe N. In the original implementation, the stopcocks were operated manually.![]() |
This image comes from the 4th edition of Meyers Konversationslexikon (1885–90). The copyrights have expired and this image is in the public domain. |
![]() |
Toto dílo je volné také v zemích, jejichž právní řád chrání majetková autorská práva po dobu života autora a 100 let po jeho smrti. Toto dílo je ve Spojených státech amerických dílem volným (public domain), protože tam bylo registrováno u U.S. Copyright Office nebo zveřejněno před 1. lednem 1930. |
Bylo zjištěno, že u tohoto souboru nejsou známa žádná omezení daná autorským právem a právy s ním souvisejícími. |
Relevantní obrázky
Relevantní články
Thomas NewcomenThomas Newcomen byl anglický kovář a vynálezce, tvůrce prvních parních strojů. V roce 1712 sestrojil se svým společníkem Thomasem Saverym parní stroj pro čerpání vody z dolů. Do roku 1733, než vypršel patent, byla takových strojů sestavena více než stovka. .. pokračovat ve čtení
Atmosférický parní strojAtmosférický parní stroj Newcomenova typu pracoval na základě kondenzace vodní páry. Když horká pára z kotle vytlačila píst nahoru, uzavřel se ventil u kotle a pod píst se vstříkla studená voda, která způsobila rychlou kondenzaci a tím i podtlak. Tak byl píst atmosférickým tlakem opět stlačen dolů a konal práci kývavým pohybem nahoru a dolů. Proto se výborně hodil k pohonu pístového čerpadla, připojeného jednoduchým táhlem. Pokud se čerpadla připojila na obě ramena vrchního vahadla, vznikl dvojčinný stroj, který dodával téměř stálý proud vody. Pracovní výkon Newcomenova stroje závisel na atmosférickém tlaku. .. pokračovat ve čtení